SRB Photographic | Camera Suppliers | SRB-Photographic.co.uk
Home > Filters > Square Filters > Elite Filter System > Elite Filter Holder
P Size Elite Filter Holder
£34.95
P Size Elite Filter Holder | SRB-Photographic.co.uk

P Size Elite Filter Holder | SRB-Photographic.co.uk P Size Elite Filter Holder | SRB-Photographic.co.uk P Size Elite Filter Holder | SRB-Photographic.co.uk P Size Elite Filter Holder | SRB-Photographic.co.uk

P Size Elite Filter Holder | SRB-Photographic.co.uk
P Size Elite Filter Holder | SRB-Photographic.co.ukP Size Elite Filter Holder | SRB-Photographic.co.ukP Size Elite Filter Holder | SRB-Photographic.co.ukP Size Elite Filter Holder | SRB-Photographic.co.uk
P Size Elite Filter Holder
UPC: ELITE-PFH
£34.95
The P Size Elite Filter Holder is a brilliantly engineered square filter holder from SRB Photographic designed to accommodate P Size square filters and the Elite filter range.
In Stock
The P Size Elite Filter Holder is a brilliantly engineered square filter holder from SRB Photographic designed to accommodate P Size square filters and the Elite filter range.
  Need help? FAQ & Help
ABOUT THIS ITEM
The P Size Elite Filter Holder is a brilliantly engineered square filter holder from SRB Photographic designed to accommodate P Size square filters and the Elite filter range.

Attach the Elite Filter Holder to your camera lens with the correct sized Elite Adaptor Ring (sold separately). Once the adaptor ring has been screwed to the lens, simply use the clip mechanism at the top of the holder to slot it onto the adaptor ring. The clip mechanism has been designed to allow for easy attaching and removing of the holder from the camera lens.

See here for Elite Adaptor Rings



This holder can take up to two P Size standard filters at any one time, simply insert them by sliding your P Size filter (85mm) into any of the two filter slots on the side of the holder. 

As well as P Size square filters, the Elite Holder can accommodate our new Elite filters. These Elite Filters have been specifically designed for the holder and feature a threaded circular rugged mount around the outside. They then screw into the centre thread of the holder, thus eliminating any light seeping. This is a particular brilliant design for when using the Elite ND1000 filter, meaning there is no longer any need to use a gasket.

Another great new feature for when using the Elite Filters, is the rotating mechanism at either end of the holder. This has been designed mainly for the Elite Polariser Filter. Once the Elite Polariser has been screwed into the holder, use the rotating mechanism to rotate the polariser clockwise or counter-clockwise to get a different amount of polarisation. 

The Elite Filter Holder has been beautifully crafted from three separate pieces of high grade aluminium material that have been carefully connected together and finished off with a black anodised coating.

Features:
- An easy-release clip system for attaching and detaching the Elite Adaptor Rings.
- Use up to two P Size (85mm) filters at one time with the screw-in Elite filters.
- The NEW screw-centre feature eliminates all forms of light seepage when using the Elite ND1000 meaning there is no need to use a gasket.
- Use the Elite Polariser in the NEW screw-centre at the same time as suing the square filters.
- The NEW rotating mechanism lets you achieve your desired polariser when using the Elite Polariser.

Includes:
1 x P Size Elite Filter Holder
1 x Cleaning Cloth
1 x Instruction Guide

Lens compatibility:
The Elite Filter Holder and Elite Adaptor Rings have been specifically designed to fit standard lenses, although may still be compatible with wide-angle lenses depending on lens diameter. Tested on a 77mm Diameter Full Frame DSLR 17-40mm Zoom Lens, vignetting was present at a focal length of 20mm.

Compare square filter systems »

​​​​​​​ ​​​​​​

 
​​​​​​​
"A well-made and designed filter system that lifts the semi-pro P system to a higher level."
February, 2017
 

 
​​​​​​​
"A very competitively priced accessory, made to top-class engineering standards."
March, 2017
More information...+
The P Size Elite Filter Holder is a brilliantly engineered square filter holder from SRB Photographic designed to accommodate P Size square filters and the Elite filter range.

Attach the Elite Filter Holder to your camera lens with the correct sized Elite Adaptor Ring (sold separately). Once the adaptor ring has been screwed to the lens, simply use the clip mechanism at the top of the holder to slot it onto the adaptor ring. The clip mechanism has been designed to allow for easy attaching and removing of the holder from the camera lens.

See here for Elite Adaptor Rings



This holder can take up to two P Size standard filters at any one time, simply insert them by sliding your P Size filter (85mm) into any of the two filter slots on the side of the holder. 

As well as P Size square filters, the Elite Holder can accommodate our new Elite filters. These Elite Filters have been specifically designed for the holder and feature a threaded circular rugged mount around the outside. They then screw into the centre thread of the holder, thus eliminating any light seeping. This is a particular brilliant design for when using the Elite ND1000 filter, meaning there is no longer any need to use a gasket.

Another great new feature for when using the Elite Filters, is the rotating mechanism at either end of the holder. This has been designed mainly for the Elite Polariser Filter. Once the Elite Polariser has been screwed into the holder, use the rotating mechanism to rotate the polariser clockwise or counter-clockwise to get a different amount of polarisation. 

The Elite Filter Holder has been beautifully crafted from three separate pieces of high grade aluminium material that have been carefully connected together and finished off with a black anodised coating.

Features:
- An easy-release clip system for attaching and detaching the Elite Adaptor Rings.
- Use up to two P Size (85mm) filters at one time with the screw-in Elite filters.
- The NEW screw-centre feature eliminates all forms of light seepage when using the Elite ND1000 meaning there is no need to use a gasket.
- Use the Elite Polariser in the NEW screw-centre at the same time as suing the square filters.
- The NEW rotating mechanism lets you achieve your desired polariser when using the Elite Polariser.

Includes:
1 x P Size Elite Filter Holder
1 x Cleaning Cloth
1 x Instruction Guide

Lens compatibility:
The Elite Filter Holder and Elite Adaptor Rings have been specifically designed to fit standard lenses, although may still be compatible with wide-angle lenses depending on lens diameter. Tested on a 77mm Diameter Full Frame DSLR 17-40mm Zoom Lens, vignetting was present at a focal length of 20mm.

Compare square filter systems »

​​​​​​​ ​​​​​​

 
​​​​​​​
"A well-made and designed filter system that lifts the semi-pro P system to a higher level."
February, 2017
 

 
​​​​​​​
"A very competitively priced accessory, made to top-class engineering standards."
March, 2017
Delivery...+
  Next day delivery (before 3:00pm)
  Standard delivery (3-5 working days)
Questions & awards...+
  Online answers FAQ & Help
  Contact us 01582 661878
  We pride ourselves on providing fantastic customer service
  
Discounts...+
  Add a FREE Selfie Kit - Spend £50 or more »
  FREE UK Standard delivery - Spend £40 or more